With these mini-dairies is possible to pasteurize milk and produce cheeses and yoghurt. Suitable for heating up to 100 °C.

Description:
The basin is constituted by a triple wall in inox steel. In the outside interspace is the thermal isolation, while in the internal interspace (honeycomb type) is filled with water used for the processes of heating and cooling.
Heating and cooling takes place supplying the endowed heat exchanger with hot water or running water (or an ice bank to achieve lower temperatures).
The heat exchanger is connected in a closed loop with a pump to the internal interspace.

Features:
– Computer with 4 programs.
– Fixed speed electric agitator (22 rpm).
– Discharge flapper valve
– Tilting device for easy full discharge.
– Stainless steel lid with hinge and spring
– Heat exchanger
– Circulation pump + safety devices

Options:
MR-xxx/1: CHEESE KIT (Planetarium + Triple Harp)
MR-xxx/2: TEMPERATURE CHART RECORDER (circular type on 24 hours disk, inserted in the command board).
MR-xxx/3: VARIABLE SPEED AGITATOR from 2 to 44 rpm through electronic inverter.
MR-xxx/4: SUPPORT FRAME that rise the height of the discharge at 65cm from floor.
MR-xxx/5: PLATFORM + STAIRS to access the Minidairy from top (discharge at 1 mt allowing to directly discharge on tables).
MR-xxx/7: “Z” STIRRER allows the mixing of the milk on machines endorsed with option /1, even with covers closed.
MR-xxx/8: 115V or 230V SINGLE PHASE POWER SUPPLY (50Hz or 60Hz)
MR-xxx/9: 230V THREE PHASE POWER SUPPLY (50Hz or 60Hz)
MR-xxx/10: LARGER STIRRER (75% of vat diam.)
MR-xxx/11: WHEELS (n.4 s.s. pivoting wheels)
MR-xxx/65: DN65 OUTFLOW AND DISCHARGE VALVE (instead of standard DN50)
MR-xxx/80: DN80 OUTFLOW AND DISCHARGE VALVE (instead of standard DN50 or DN65)

Technical data:
Power supply: 230V single phase

The Company reserves the right to modify the technical data and characteristics at any time without notice